Define Location Template.General

From Navigates Help

Structured Products
Define Parameters Define Rights and Prices Define Service Define Inputs Define Recurrence Patterns Setup PTP Matrix Trans Type Define Location Template

The Define Location Template screen is used to define location templates.

Contents 1 Using Search Screen 2 Fields 3 Adding a Location Template 4 Updating a Location 5 Deleting a Location

[edit] Using Search Screen

Template:Sscreen

[edit] Fields

The following fields appear in the top portion of the screen:

• Template Type - Abbreviated name of the template type.
• Operating Location – A unique ID and name associated with a physical or logical location on the pipeline.
• Dir of Flow - Indicates gas flow direction for the location.
• Location Type – Indicates the type of location.
• Location Class – Indicates the location class.
• Process Type
• Zone – Indicates the zone, to which a location belongs.
• State/County – The full name of the state and county where the point is located.
• Sec/Town/Range – The section, township and range codes of the legal description for the location.
• Latitude – Indicates location’s latitude.
• Longitude – Indicates locations’s longitude.
• IHS Location Type – Location Type assigned by the IHS Energy Group.
• DRN Nbr – Unique Data Reference Number.
• Operator DRN Nbr – Operator's unique Data Reference Number
• Operator Location Code – Operator's location code.
• Pipeline Segment – Identifies the segment that the location is located in.
• Parent Segments – Indicates the pipeline that the location resides on.
• Aggregation Area - Indicates aggregations area.
• Valve Section ID – Valve ID number.
• Regulation Code – Indicates the FERC regulation (284G or 284B).
• EGM – Indicates whether the location is measured electronically.
• Pipeline Interconnect – Indicates if the location resides on a pipeline intersection.
• Authority Required –
• Offshore Meter – Indicates if the location has an offshore meter.
• Nom Interconnect - Indicates if the location is used as an interconnect point for nominations.
• Flow Control Device – Indicates presence of the flow control device.
• Operationally Available –
• Producer Required –
• Hourly –

The following fields appear in the bottom portion of the screen (Location History):

• Eff Begin Date
• Eff End Date
• Rate Zone Cd
• Max Capacity Qty
• Max Backhaul Capacity Qty
• Operating Capacity Qty
• Operating Backhaul Capacity Qty
• Operating Gross Cap Qty
• Operating Gross Backhaul Cap Qty
• Location Status
• Usage Type
• Measurement Frequency
• Gth/Trans
• Mileage
• Lateral Mileage
• Alloc Tiers
• Allow Alloc Limit Value
• Updater
• Update TimeStamp

[edit] Adding a Location Template

There are two ways to add a new location template: you may copy an existing record and modify the data to reflect your new record, or you may create a new record from scratch.
To copy an existing record, perform the following steps:

• Select the record you wish to copy from the list.
• Click at the top of the screen. The system will create a new location template and location history with data from the original record.
• Change data in the location area and location history matrix, as necessary.
• Template:Submit.

To create a new location template from scratch, perform the following steps:

• Click at the top of the screen. The system will create a new location template with location history.
• Fill out the required fields.
• Template:Submit.

[edit] Updating a Location

Template:Update

[edit] Deleting a Location

You may not delete a location template saved in the system; you can only update the information associated with the template.